• Gratis levering vanaf €75
  • Eigen winkel en muziek experts
  • Deskundig advies van onze experts
  • Uitgebreide sortering

Octave V40 SE

€4.199,00

Model: V40 SE

Fabrikant: Octave

Betaal veilig met iDEAL, PayPal of bank overschrijving.


Omschrijving

The V 40 SE is a line level integrated amplifier with 2 x 40 W peak output power. He is a further development and direct descendant of the successful V 40 and V 50 amplifier models. His powerful, clear bass fundamentals and his captivating resolution in the high frequencies win much respect. His unique features lift the V 40 SE into the 21st Century, while his performance earned him the rare “Stereoplay Highlight” (issue 07-2009), a prestigious award bestowed by the German high-end audio magazine Stereoplay.

The V 40 SE output stage consists of two power pentodes (Type 6550) for each channel. Due to the BIAS Control and Monitoring System, the use of other pin-compatible output tubes is possible to match the amplifier to personal taste, or to benefit from new or improved tubes.

Like all OCTAVE Amps the, V 40 SE is based on the enhanced pentode configuration. This configuration ensures the absolute stability of the amplifier against the unstable impedance of the loudspeaker. Impedance mismatch is without consequence, and the V 40 SE is stable down to a 2 Ohm Load. An important contributor to this stability is the single impedance output transformer.

The V 40 SE is the perfect amp for speakers with an average efficiency rating.But not only is the low impedance capability an advantage, with his exceptional Signal-to-Noise ratio of –110dB / Full Power he is also an ideal partner for high efficiency loudspeakers.
 
Basic Model   V 40 SE Line
Tube Complement  
4 x 6550
Design  
Aluminium silver or Aluminium black
Options  
 
  Spezifications      
invi
  Power Output  
2 x 40 Watt into 4 Ohm
 
invi
  Frequency Response  
20 Hz – 70 kHz @ 40 W -1 / -3 dB
5 Hz – 70 kHz @ 10 W -0 / -2 dB
 
invi
  Total Harmonic Distortion  
< 0,1% @ 10 Watt into 4 Ohm
 
invi
  Signal-to-Noise Ratio  
-110 dB / 40 W
 
invi
  Noise / Ripple  
< 300 μV
 
invi
  Optimum Speaker Impedance  
3 – 16 Ohm
 
invi
  Minimum Speaker Impedance  
2 Ohm
 
invi
  No-load current  
28 mA - BIAS low, 34 mA - BIAS high
 
invi
  Connections  

Inputs: 4 x Line Level (Cinch)

Outputs:1 x Tape

Pre-Out and Main-In

 
  Features  

ECO Mode, Bias Adjustment, Power Management

 
  Configuration  

Push Pull Pentode Circuit
Negative Grid Voltage adjustable for each tube
with 3 turn Precision Regulators,
Wideband Output Transformers using Silicon steel PMZ Core,
single Impedance Output,
Optimum Load Impedance 3 - 10 Ohm
Nominal Speaker Impedance,
Effieciency greater than 85dB,
Amplifier remains stable with
No Load and Output short circuited

 

Extra afbeeldingen


Schrijf een review!

Er zijn geen reviews geschreven. Schrijf als eerste een review. U moet wel eerst inloggen.

Schrijf een review

© 2015 Spanjaard Muziekhandel BV | Algemene voorwaarden